Find great deals on ebay for model boat smoke unit. shop with confidence.. A must for all model boat enthusiasts. our 12 v model boat smoke effect units generate near instantaneous cold 'smoke effect' from water. it's odourles, does not get hot and runs for circa 30. The device is scratch build ,it use commercial fluid or you can do it yourself using 70% of glycerine and 30% of water.the battery is a lipo 11,1v 3,3 ah. the smoke unit need 0.9 a for maximum smoke..
I came across a smoke unit that is made for taigen model r/c tanks its a new version now with more smoke. have a look at you- tube under taigen model r/c tanks. has two outlets and only needs 2 to 4 drops of smoke oil for a running time of approx 30 min to one hour, power needs are from 7.4 to 8.4 volts,depending how much smoke you want... I have spent many years developing various types of smoke units. the first photo shows the what i have ended up with, this is built around a 2"x3"x1" plastic box, a 22mm plastic plumbing pipe end and a mini fan unit.. Our s3 seuthe smoke unit (oil-burner) runs from 8v-14v and draws 700ma. this isn't a lot of power but it wouldn't help with motor running times if you were to operate it from the same battery as the main drive. if you install it with our p68s fan controller then you can increase the volume of smoke as the drive motor speeds up..
Comments
Post a Comment